Le régulateur EPEVER XTRA1210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.
Le régulateur EPEVER XTRA1210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.
Points forts
Product Highlights
High quality and low failure rate components of ST or IR to ensure the service life
Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5%
Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%
Advanced MPPT control algorithm to minimize the lost rate and lost time
Accurate recognizing and tracking of multi-peaks maximum power point
Wider MPP(maximum power point) running voltage to optimize PV utilization
Support multi battery types including lithium batteries
Equipped with a stable self-activation function for the lithium battery
Set the battery voltage parameters on the LCD
Battery temperature compensation
Limit the charging power & charging current to no higher than the rated value
Real-time energy statistics function
Charging power reduction automatically for over-temperature
Built-in Bluetooth to adjust settings through EPEVER APP
RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring
Setting parameters via the PC software, APP, or remote meter
Constant voltage output function
Comprehensive electronic protections
Multiple load work modes
Dustproof and waterproof design with IP33 enclosure
Low self-consumption, lower than 10mA
Operation at full load without charging power reduced in the working temperature range
Caractéristiques techniques
Battery Rated Voltage
12 / 24 VDC or automatique
Rated Charging Current
10 A
Rated Discharging Current
10 A
Controller Work Voltage Range
8~31 V
PV Maximum Open-circuit Voltage
100 V (at minimum operating environment temperature), 92 V (at 25°C environment temperature)
MPPT Voltage Range
(Battery voltage+2 V)~72 V
Rated Charging Power
130W / 12 V, 260W / 24 V
Maximum Conversion Efficiency
98,20%
Maximum Load Efficiency
96,20%
Static Losses(Enable the com.port)
≤15mA(12 V), ≤9mA(24 V)
Static Losses(Disable the com.port)
≤8mA(12 V), ≤6mA(24 V)
Discharge-circuit Voltage Drop
≤0,23 V
Temperature Compensation
-3mV / °C / 2 V (Default)
Grounding Type
Common negative
RS485 Port
5 VDC / 200mA(RJ45)
LCD Backlight Time
Default: 60s, Range: 0-9995(0S: the backlight is ON all the time)
Dimension (LxWxH)
175x143x48mm
Mounting Size
120x134mm
Mounting Hole Size
Φ5mm
Terminal
12AWG(4mm²)
Recommended Wire Size
12AWG(4mm²)
Net Weight
0,59 kg
Work Temperature Range
-25°C~50°C
Storage Temperature Range
-20°C~70°C
Relative Humidity
≤95%, N,C,
Indice de protection
IP33 (3-protection against solid objects: protected against solid objects over 2,5mm, 3-protected against sprays to 60° from the vertical,
Pollution Degree
PD2
Tension système nominale
12-24 VDC-auto
Type de batterie
lithium-lead-acid
Technologie de charge
mppt
Maximum Charging Current
10 A
Courant de décharge maximal
10 A
Max PV input power
130w-12 V-260w-24 V
Tension PV à vide maximale
100 V
Affichage
lcd
Communication
rs485
Built-in Bluetooth
yes
Applications
Cette référence convient notamment aux camping-cars et véhicules de loisirs.
Documentation
La documentation fabricant EPEVER disponible pour cette référence est importée dans les pièces jointes de la fiche produit.
Informations fabricant
Fabricant : EPEVER
Modèle : XTRA1210N G3 BLE
Référence : XTRA1210N G3 BLE
Catégorie fabricant : régulateur de charge solaire
XTRA1210N G3 BLE
Fiche technique
MPPT Voltage Range
(Battery voltage+2V)~72V
Indice de protection
IP33 (3-protection against solid objects: protected against solid objects over 2.5mm. 3-protected against sprays to 60° from the vertical.
PrésentationLe régulateur EPEVER LS1024EU utilise une technologie PWM de 10 A pour systèmes 12 / 24 VDC automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM...
Présentation
Le régulateur EPEVER HP3522-AH1250P20A utilise une technologie MPPT de 120 A. Tension PV à vide maximale : 500 V. Compatible avec lithium-lead-acid.
Points forts
Product Highlights Pure sine wave output Supports battery or...
PrésentationLe régulateur EPEVER LS0512EU utilise une technologie PWM de 5 A pour systèmes 12 VDC. Tension PV à vide maximale : 30 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM série.Indicateur LED...
PrésentationLe régulateur EPEVER TEP10425 utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 250 V. Compatible avec aGM(Default) / GEL / FLD / User.Points fortsProduct Highlights
Compatible with 12V/24V/48V...
PrésentationLe régulateur EPEVER DR3210N-DDS utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux sites isolés et systèmes hors...
PrésentationLe régulateur EPEVER IT8420NC G3(IP32) utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 200 V. Compatible avec aGM (Default) / Gel / Plomb ouvert / User.Points fortsProduct Highlights
Supports...
PrésentationLe régulateur EPEVER TEP8425 utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 250 V. Compatible avec aGM(Default) / GEL / FLD / User.Points fortsProduct Highlights
Compatible with 12V/24V/48V...
PrésentationLe régulateur EPEVER HP5542-AH1050P20A utilise une technologie MPPT de 100 A. Tension PV à vide maximale : 500 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
Pure sine wave output
Supports battery or non-battery...
PrésentationLe régulateur EPEVER TRC3210 utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux camping-cars et véhicules de...
PrésentationLe régulateur EPEVER XTRA3415N G3 utilise une technologie MPPT. Tension PV à vide maximale : 150 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
High quality and low failure rate components of ST or IR to ensure...
Contrôleur de charge solaire seeit pv50 watts 12v
Le contrôleur de charge photovoltaïque Seeit est idéal pour la mise en œuvre de petites installations solaires équipées de petits panneaux photovoltaïques et de batteries rechargeables 12 V. Il...
PrésentationLe régulateur EPEVER TRC5215 utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux camping-cars et véhicules de...
Régulateur solaire Steca, tension du panneau solaire 12 V, 24 V 10a
La série de contrôleurs de charge Steca PR 10-30 est le fleuron de la gamme.L'utilisation des dernières technologies de chargement combinée à une détermination de l'état de...
Régulateur solaire Steca, tension du panneau solaire 12 V, 24 V 15a
La série de contrôleurs de charge Steca PR 10-30 est le fleuron de la gamme.L'utilisation des dernières technologies de chargement combinée à une détermination de l'état de...
PrésentationLe régulateur EPEVER Tracer2210AN G3 utilise une technologie MPPT de 20 A pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
Constant voltage output...
PrésentationLe régulateur EPEVER IT6420NC G3(IP32) utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 200 V. Compatible avec aGM (Default) / Gel / Plomb ouvert / User.Points fortsProduct Highlights
Supports...
Le régulateur EPEVER XTRA1210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.
error Votre avis ne peut pas être envoyé