Présentation
Le régulateur EPEVER XTRA3415N G3 utilise une technologie MPPT. Tension PV à vide maximale : 150 V. Compatible avec lithium-lead-acid.
Points forts
- Product Highlights
High quality and low failure rate components of ST or IR to ensure the service life
Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5%
Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%
Advanced MPPT control algorithm to minimize the lost rate and lost time
Accurate recognizing and tracking of multi-peaks maximum power point
Wider MPP(maximum power point) running voltage to optimize PV utilization
Support multi battery types including lithium batteries
Equipped with a stable self-activation function for the lithium battery
Set the battery voltage parameters on the LCD
Battery temperature compensation
Limit the charging power & charging current to no higher than the rated value
Real-time energy statistics function
Charging power reduction automatically for over-temperature
Built-in Bluetooth to adjust settings through EPEVER APP
RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring
Setting parameters via the PC software, APP, or remote meter
Constant voltage output function
Comprehensive electronic protections
Multiple load work modes
Dustproof and waterproof design with IP33 enclosure
Low self-consumption, lower than 10mA
Operation at full load without charging power reduced in the working temperature range
Caractéristiques techniques
| Battery Rated Voltage | 12 / 24 / 48 VDC automatique |
|---|
| Rated Charging Current | 30 A |
|---|
| Rated Discharging Current | 30 A |
|---|
| Controller Work Voltage Range | 8~62 V |
|---|
| PV Maximum Open-circuit Voltage | 150 V (at minimum operating environment temperature) 138 V (at 25°C environment temperature) |
|---|
| MPPT Voltage Range | (Battery voltage+2 V)~108 V |
|---|
| Rated Charging Power | 390W / 12 V, 780W / 24 V, 1170W / 36 V, 1560W / 48 V |
|---|
| Maximum Conversion Efficiency | 98,10% |
|---|
| Maximum Load Efficiency | 96,90% |
|---|
| Static Losses(Enable the com.port) | ≤14mA(12 V), ≤9mA(24 V) , ≤8mA(36 V) +<7mA(48 V) |
|---|
| Static Losses(Disable the com.port) | ≤8mA(12 V), ≤5mA(24 V), ≤5mA(36 V), ≤5mA(48 V) |
|---|
| Discharge-circuit Voltage Drop | ≤0,23 V |
|---|
| Temperature Compensation | -3mV / °C / 2 V (Default) |
|---|
| Grounding Type | Common negative |
|---|
| RS485 Port | 5 VDC / 200mA(RJ45) |
|---|
| LCD Backlight Time | Default: 60s, Range: 0-9995(0S: the backlight is ON all the time) |
|---|
| Dimension (LxWxH) | 255x187x75,7mm |
|---|
| Mounting Size | 200x178mm |
|---|
| Mounting Hole Size | Φ5mm |
|---|
| Terminal | 6AWG(16mm²) |
|---|
| Recommended Wire Size | 8AWG(10mm²) |
|---|
| Net Weight | 2,16 kg |
|---|
| Work Temperature Range | -25°C~45°C |
|---|
| Storage Temperature Range | -20°C~70°C |
|---|
| Relative Humidity | ≤95%, N,C, |
|---|
| Indice de protection | IP33 (3-protection against solid objects: protected against solid objects over 2,5mm, 3-protected against sprays to 60° from the vertical, |
|---|
| Pollution Degree | PD2 |
|---|
| Type de batterie | lithium-lead-acid |
|---|
| Technologie de charge | mppt |
|---|
| Maximum Charging Current | 30 A |
|---|
| Courant de décharge maximal | 30 A |
|---|
| Max PV input power | 390w-12 V-780w-24 V-1170w-36 V-1560w-48 V |
|---|
| Tension PV à vide maximale | 150 V |
|---|
| Affichage | lcd |
|---|
| Communication | rs485 |
|---|
| Built-in Bluetooth | no |
|---|
Applications
Cette référence convient notamment aux camping-cars et véhicules de loisirs.
Documentation
La documentation fabricant EPEVER disponible pour cette référence est importée dans les pièces jointes de la fiche produit.
Informations fabricant
- Fabricant : EPEVER
- Modèle : XTRA3415N G3
- Référence : XTRA3415N G3
- Catégorie fabricant : régulateur de charge solaire
Fiche technique
- MPPT Voltage Range
- (Battery voltage+2V)~108V
- Battery Rated Voltage
- 12/24/48VDC Auto
- Rated Charging Power
- 390W/12V, 780W/24V, 1170W/36V, 1560W/48V
- PV Maximum Open-circuit Voltage
- 150V (at minimum operating environment temperature) 138V (at 25°C environment temperature)
- Rated Charging Current
- 30A
- Controller Work Voltage Range
- 8~62V
- Maximum Load Efficiency
- 96.90%
- Rated Discharging Current
- 30A
- Maximum Conversion Efficiency
- 98.10%
Références spécifiques
- mpn
- XTRA3415N G3
16 autres produits dans la même catégorie :
PrésentationLe régulateur EPEVER TRC3210 utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux camping-cars et véhicules de...
PrésentationLe régulateur EPEVER LS1024EU utilise une technologie PWM de 10 A pour systèmes 12 / 24 VDC automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM...
Présentation
Le régulateur EPEVER VS6048AU utilise une technologie PWM de 60 A pour systèmes 12 / 24 / 36 / 48 VDC automatique. Tension PV à vide maximale : 96 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.
Points forts
Mode de...
PrésentationLe régulateur EPEVER VS1024AU utilise une technologie PWM de 10 A pour systèmes 12 / 24 VDC automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM...
PrésentationLe régulateur EPEVER DR3210N-DDS utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux sites isolés et systèmes hors...
PrésentationLe régulateur EPEVER DR2210N-DDS utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux camping-cars et véhicules de loisirs,...
PrésentationLe régulateur EPEVER LS0512EU utilise une technologie PWM de 5 A pour systèmes 12 VDC. Tension PV à vide maximale : 30 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM série.Indicateur LED...
PrésentationLe régulateur EPEVER IT10420NC G3(IP32) utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 200 V. Compatible avec aGM (Default) / Gel / Plomb ouvert / User.Points fortsProduct Highlights...
PrésentationLe régulateur EPEVER LS1024B utilise une technologie PWM de 10 A pour systèmes 12 / 24 VDC / automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert / User.Points fortsProtections...
Contrôleur de charge solaire seeit pv50 watts 12v
Le contrôleur de charge photovoltaïque Seeit est idéal pour la mise en œuvre de petites installations solaires équipées de petits panneaux photovoltaïques et de batteries rechargeables 12 V. Il...
PrésentationLe régulateur EPEVER LS3024EU utilise une technologie PWM de 30 A pour systèmes 12 / 24 VDC automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM...
PrésentationLe régulateur EPEVER HP5542-AH1050P20A utilise une technologie MPPT de 100 A. Tension PV à vide maximale : 500 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
Pure sine wave output
Supports battery or non-battery...
Présentation
Le régulateur EPEVER HP3522-AH1250P20A utilise une technologie MPPT de 120 A. Tension PV à vide maximale : 500 V. Compatible avec lithium-lead-acid.
Points forts
Product Highlights Pure sine wave output Supports battery or...
PrésentationLe régulateur EPEVER TEP8425 utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 250 V. Compatible avec aGM(Default) / GEL / FLD / User.Points fortsProduct Highlights
Compatible with 12V/24V/48V...
PrésentationLe régulateur EPEVER TRC2206 utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux camping-cars et véhicules de...
PrésentationLe régulateur EPEVER LS2024EU utilise une technologie PWM de 20 A pour systèmes 12 / 24 VDC automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM...
error Votre avis ne peut pas être envoyé