Le régulateur EPEVER XTRA3210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.
Le régulateur EPEVER XTRA3210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.
Points forts
Product Highlights
High quality and low failure rate components of ST or IR to ensure the service life
Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency is up to 99.5%
Maximum DC/DC transfer efficiency is as high as 98.5%; full load efficiency is up to 97.2%
Advanced MPPT control algorithm to minimize the lost rate and lost time
Accurate recognizing and tracking of multi-peaks maximum power point
Wider MPP(maximum power point) running voltage to optimize PV utilization
Support multi battery types including lithium batteries
Equipped with a stable self-activation function for the lithium battery
Set the battery voltage parameters on the LCD
Battery temperature compensation
Limit the charging power & charging current to no higher than the rated value
Real-time energy statistics function
Charging power reduction automatically for over-temperature
Built-in Bluetooth to adjust settings through EPEVER APP
RS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring
Setting parameters via the PC software, APP, or remote meter
Constant voltage output function
Comprehensive electronic protections
Multiple load work modes
Dustproof and waterproof design with IP33 enclosure
Low self-consumption, lower than 10mA
Operation at full load without charging power reduced in the working temperature range
Caractéristiques techniques
Battery Rated
12 / 24 VDC or automatique
Voltage Rated Charging Current
30 A
Rated Discharging Current
30 A
Controller Work Voltage Range
8~31 V
PV Maximum Open-circuit Voltage
100 V (at minimum operating environment temperature), 92 V (at 25°C environment temperature)
MPPT Voltage Range
(Battery voltage+2 V)~72 V
Rated Charging Power
390W / 12 V, 780W / 24 V
Maximum Conversion Efficiency
98,60%
Maximum Load Efficiency
96,60%
Static Losses(Enable the com.port)
≤15mA(12 V), ≤9mA(24 V)
Static Losses(Disable the com.port)
≤8mA(12 V), ≤5mA(24 V)
Discharge-circuit Voltage Drop
≤0,23 V
Temperature Compensation
-3mV / °C / 2 V (Default)
Grounding Type
Common negative
RS485 Port
5 VDC / 200mA(RJ45)
LCD Backlight Time
Default: 60s, Range: 0-9995(0S: the backlight is ON all the time)
Dimension (LxWxH)
230x165x63mm
Mounting Size
173x156mm
Mounting Hole Size
Φ5mm
Terminal
6AWG(16mm²)
Recommended Wire Size
8AWG(10mm²)
Net Weight
1,30 kg
Work Temperature Range
-25°C~50°C
Storage Temperature Range
-20°C~70°C
Relative Humidity
≤95%, N,C,
Indice de protection
IP33 (3-protection against solid objects: protected against solid objects over 2,5mm, 3-protected against sprays to 60° from the vertical,
Pollution Degree
PD2
Tension système nominale
12-24 VDC-auto
Type de batterie
lithium-lead-acid
Technologie de charge
mppt
Maximum Charging Current
30 A
Courant de décharge maximal
30 A
Max PV input power
390w-12 V-780w-24 V
Tension PV à vide maximale
100 V
Affichage
lcd
Communication
rs485
Built-in Bluetooth
yes
Applications
Cette référence convient notamment aux camping-cars et véhicules de loisirs.
Documentation
La documentation fabricant EPEVER disponible pour cette référence est importée dans les pièces jointes de la fiche produit.
Informations fabricant
Fabricant : EPEVER
Modèle : XTRA3210N G3 BLE
Référence : XTRA3210N G3 BLE
Catégorie fabricant : régulateur de charge solaire
XTRA3210N G3 BLE
Fiche technique
MPPT Voltage Range
(Battery voltage+2V)~72V
Indice de protection
IP33 (3-protection against solid objects: protected against solid objects over 2.5mm. 3-protected against sprays to 60° from the vertical.
PrésentationLe régulateur EPEVER LS1024EU utilise une technologie PWM de 10 A pour systèmes 12 / 24 VDC automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM...
PrésentationLe régulateur EPEVER Tracer2210AN G3 utilise une technologie MPPT de 20 A pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
Constant voltage output...
PrésentationLe régulateur EPEVER Tracer2206AN G3 utilise une technologie MPPT de 20 A pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 60 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
Constant voltage output...
Contrôleur de charge solaire seeit pv50 watts 12v
Le contrôleur de charge photovoltaïque Seeit est idéal pour la mise en œuvre de petites installations solaires équipées de petits panneaux photovoltaïques et de batteries rechargeables 12 V. Il...
PrésentationLe régulateur EPEVER QI1012-0610C utilise une technologie MPPT de 60 A. Compatible avec lithium battery / Lead-acid battery.Points fortsProduct Highlights
Compact & Versatile Design: Smart energy management; Pure sine wave output...
PrésentationLe régulateur EPEVER XTRA4215N G3 utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 150 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
High quality and low failure rate...
PrésentationLe régulateur EPEVER Tracer1206AN G3 utilise une technologie MPPT de 10 A pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 60 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
Constant voltage output...
Régulateur solaire Seeit, tension du panneau solaire 12 V, 24 V 195watts
Les régulateurs de charge Seeit sont idéaux pour les installations solaires équipées de panneaux photovoltaïques de petite puissance (5W à 780W) et de batteries...
Présentation
Le régulateur EPEVER TEP6425 utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 250 V. Compatible avec aGM(Default) / GEL / FLD / User.
Points forts
Product Highlights Compatible with...
PrésentationLe régulateur EPEVER IT10420NC G3(IP32) utilise une technologie MPPT pour systèmes 12-24-48 VDC-auto. Tension PV à vide maximale : 200 V. Compatible avec aGM (Default) / Gel / Plomb ouvert / User.Points fortsProduct Highlights...
PrésentationLe régulateur EPEVER TRC3210 utilise une technologie MPPT.Points fortsTechnologie MPPT pour optimiser la récupération de l’énergie solaire.ApplicationsCette référence convient notamment aux camping-cars et véhicules de...
PrésentationLe régulateur EPEVER TRACER1210AN G3 utilise une technologie MPPT de 10 A pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
Constant voltage output...
PrésentationLe régulateur EPEVER LS1024B utilise une technologie PWM de 10 A pour systèmes 12 / 24 VDC / automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert / User.Points fortsProtections...
PrésentationLe régulateur EPEVER VS2024AU utilise une technologie PWM de 20 A pour systèmes 12 / 24 VDC automatique. Tension PV à vide maximale : 50 V. Compatible avec étanche (par défaut) / Gel / Plomb ouvert.Points fortsMode de charge PWM...
PrésentationLe régulateur EPEVER XTRA1210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
High quality and low failure rate...
PrésentationLe régulateur EPEVER XTRA4210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.Points fortsProduct Highlights
High quality and low failure rate...
Le régulateur EPEVER XTRA3210N G3 BLE utilise une technologie MPPT pour systèmes 12-24 VDC-auto. Tension PV à vide maximale : 100 V. Compatible avec lithium-lead-acid.
error Votre avis ne peut pas être envoyé